東莞>高合華塑膠-工程塑膠原料PA POM>供求信息

GS 二硫化鉬內潤滑 極好耐磨性的PA66 

尼龍GS二硫化鉬內部潤滑，添加劑：二硫化鉬潤滑劑。性能特點：尺寸穩定性好，摩擦系數低，強度好，剛性高，韌性好，耐化學腐蝕，耐疲勞性好，降噪，耐溶解性，耐刮擦性好，抗磨性好，耐熱性高，耐油性，耐油脂性，自潤滑性。阻燃性：HB。符合 ROHS 標準。用途：齒輪，閥門/閥門組件，抗磨條，套筒，止推墊圈，軸承。GS 改善了機械、熱和軸承類型的性能。它是PA66和二硫化鉬（MoS2）的組合，同時保持其基本的電氣和化學性能。通過復合，尼龍被給予額外的潤滑，允許在使用過程中部分潤滑或無潤滑。它還有利于顯著提高潤滑部件的使用壽命，是一種非常具有性價比的選擇。與未填充的PA66相比，具有更高的抗磨性，減少表面摩擦，更高的強度和剛度，從而提高尺寸穩定性。

質量保障.原產原包
配送到廠.持續交付
塑料供應鏈.靠譜蔣志華
我們采取可查證系統化運作模式。
我們是熱塑性工程塑料樹脂的供應鏈服務商。

PA GS molybdenum disulfide internal lubrication, additive: molybdenum disulfide lubricant. Performance characteristics: Good dimensional stability, low friction coefficient, good strength, high rigidity, good toughness, chemical corrosion resistance, good fatigue resistance, noise reduction, solubility resistance, scratch resistance, good wear resistance, high heat resistance, oil resistance, grease resistance, self-lubricating. Flame retardancy: HB. ROHS compliance. Usage: gears, valve/valve components, wear strips, sleeves, thrust washers, bearings. GS improves the properties of mechanical, thermal, and bearing types. It is a combination of PA66 and molybdenum disulfide (MoS2), while maintaining its basic electrical and chemical properties. By compounding, the nylon is given additional lubrication, allowing for partial or no lubrication during use. It is also beneficial for significantly increasing the service life of lubricating components and is a very cost-effective choice. Providing higher wear resistance, reducing surface friction, higher strength and stiffness compared to unfilled PA66, improving dimensional stability.